4" Suspension System w/ Fox Performance Series Shock Absorbers - 2005 - 2007 Ford F250 (Non-Dually)/F350 (Non-Dually)/Excursion 4WD

Part #: 10-42405-F

MSRP: $1,670.00 USD

The launch of the all new Ford "Super Duty" in 2001 brought a frenzy of excitement to Blue Oval truck enthusiasts. A new diesel motor and a new solid axle front suspension lent itself to ease of modification and RCD Suspension capitalized on this new and popular platform. 2005 brought a whole new platform, eliminating the poor riding leaf springs and putting coils and radius arms in their place. RCD Suspension engineers capitalized on this and put together three systems, 2" Leveling, 4" Standard, and the premium 6" Long Arm 4 Link Conversion Kit. RCD Suspension continues to produce systems for most F-250 / F-350 models from 2001 through 2008 model years.

The RCD 4" Suspension System for the 2005 - 2007 Ford F250 / 350 8-Lug, 4WD includes: Progressive rate coil springs made from high quality U.S. spring steel, providing long life, and superior ride characteristics; Fox Performance Series shock absorbers; heavy duty 1/4" thick mounting brackets provide enhanced strength and alignment characteristics; 3/8" plate steel extreme duty track bar drop bracket eliminates bump steer and provides the ultimate in strength and durabilit; forged steel drop pitman arm maintains precise steering geometry; extended sway bar links provide factory mounting locations and proper sway bar function; stainless steel extended front brake lines; and unique "Gator Black" polyurethane powder coat finish.

This kit is compatible with:

• 2005 - 2007 Ford Excursion - 4WD
• 2005 - 2007 Ford F250 - 4WD (Non-Dually)
• 2005 - 2007 Ford F350 - 4WD (Non-Dually)

This kit includes:

• Radius arms & track bar drop down
• Coil springs
• Blocks
• Fox Performance Series Shock Absorbers

Wheel/Tire Specifications:

• Max Tire Size: 35" x 12.5" - Minor fender and/or bumper trimming may be required.
• Max Backspace: 17" & larger x 8" - 4.625" backspacing.

Additional Information:

• Will NOT work with Air Ride or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Ford Dealer
• Vehicles equipped with two-piece driveline may require Drive Shaft Support Drop Down Bracket for the factory carrier bearing. See below.
• Rear ride height may vary on certain models depending on the height of the factory block. Additional rear lift may be required on certain models.
• Factory Steering Stabilizers are not retained. Heavy duty replacement is required. Call or email for recommendations.

Click Here to see this Kit with Bilstein Shock Absorbers

2" Leveling Kit w/ Fox Performance Series Shock Absorbers - 2005 - 2007 Ford F250(Non-Dually)/F350(NonDually)/Excursion 4WD

Part #: 10-42205-F

MSRP: $805.00 USD

RCD Suspension took a different approach than other manufactures in the leveling kit business, instead of spacers and brackets, RCD developed a "High Performance Leveling Kit" complete with replacement coil springs for a superior ride, replacement alignment cam eccentrics and custom tuned Fox Performance Series shock absorbers which provide a smooth, precise and controlled ride.

2005-2014 2" Suspension System - Ford F250 / F350 8-Lug, 4WD features: Progressive rate coil springs are made from high quality U.S. spring steel providing long life and superior ride characteristics and Unique "Gator Black" polyurethane powder coat finish. Replacement Front Coil Springs -5160 alloy steel, Aftermarket Front Alignment Cams for Proper Adjustment, Increased Wheel Travel, Improved Handling and Suspension Performance, and traditional RCD Suspension fit and finish.

This kit is comaptible with:

• 2005 - 2007 Ford F250 - 4WD (Non-Dually)
• 2005 - 2007 Ford F350 - 4WD (Non-Dually)
• 2005 - 2007 Ford Excursion - 4WD

This kit includes:

• Coil springs
• Fox Performance Series Shock Absorbers

Wheel/Tire Specifications:

• Max Tire Size: 33" x 12.5" - Minor fender and/or bumper trimming may be required.
• Max Backspace: 16" & larger x 8"

Additional Information:

• Will NOT work with Air Ride or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Ford Dealer
• Stock drive shaft retained

Click Here to see this Kit with Bilstein Shock Absorbers

PRODUCT NOT AVAILABLE

6" Suspension System w/ Fox Shock Absorbers, 2008 - 2010 Ford F250/F350 4WD, Non-Dually 

Part #: 10-42608-F

MSRP: $2,760.00 USD

The launch of the all new Ford "Super Duty" in 2001 brought a frenzy of excitement to Blue Oval truck enthusiasts. A new diesel motor and a new solid axle front suspension lent itself to ease of modification and RCD Suspension capitalized on this new and popular platform. 2005 brought a whole new platform, eliminating the poor riding leaf springs and putting coils and radius arms in their place. RCD Suspension engineers capitalized on this and put together three systems, 2" Leveling, 4" Standard, and the premium 6" Long Arm 4 Link Conversion Kit. RCD Suspension continues to produce systems for most F-250 / F-350 models from 2001 through 2008 model years.

The RCD 6" Suspension System for the 2008-2010 Ford F250 /F350, 4 Link 8-Lug, 4WD includes: The 6" 4-Link design by RCD eliminates the factory radius arms using heavy duty 2"x.125" swaged DOM tubing Link bars. These bars utilize high articulation urethane encased flex joints at the frame mounts and 1/4" plate steel Clevis at the axle. The flex joints are greasable via gun drilled pivot bolts and Zerk fittings. A one-piece track bar drop bracket constructed of 3/8" plate steel ensures ultimate strength and precise axle location with bind-free axle articulation. A pitman arm is also included. The 4.25" factory style replacement rear block and u-bolt kit utilizes a 1-piece design with the bump stop wing cast into it and replaces the factory unit. No stacking of blocks required and proper compression bump travel is maintained. Four Fox shocks complete this package.

This kit is compatible with:

• 2008 - 2010 Ford F250 - 4WD (Non-Dually) (This is a 6" lift)
• 2008 - 2010 Ford F350 - 4WD (Non-Dually) (This is a 2" lift)

This kit includes:

• Radius arms & track bar drop down
• Coil springs
• Blocks
• Fox Performance Series Shock Absorbers
• 4-link arms, Driver side
• 4-link arms, Passenger side

Wheel/Tire Specifications:

Max Tire Size: 36" x 12.5 " - Minor trimming may be required.

Max Backspace: 17" & larger x 8" - 4.625" backspacing.

Additional Information:

• Will NOT work with Air Ride or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Ford Dealer
• Vehicles equipped with two-piece driveline may require Drive Shaft Support Drop Down Bracket (Part #: 20-68747) for the factory carrier bearing.
• Rear ride height may vary on certain models depending on the height of the factory block. Additional rear lift may be required on certain models.

Click Here to see this Kit with Bilstein Shock Absorbers

PRODUCT NOT AVAILABLE

6" Suspension System w/ Fox Performance Series Shock Absorbers, 2005 - 2007 Ford F250 4WD, Non-Dually/Ford Excursion 4WD.

Part #: 10-42605-F

The launch of the all new Ford "Super Duty" in 2001 brought a frenzy of excitement to Blue Oval truck enthusiasts. A new diesel motor and a new solid axle front suspension lent itself to ease of modification and RCD Suspension capitalized on this new and popular platform. 2005 brought a whole new platform, eliminating the poor riding leaf springs and putting coils and radius arms in their place. RCD Suspension engineers capitalized on this and put together three systems, 2" Leveling, 4" Standard, and the premium 6" Long Arm 4 Link Conversion Kit. RCD Suspension continues to produce systems for most F-250 / F-350 models from 2001 through 2008 model years.

The RCD 6" Suspension System for the 2005-2007 Ford F250 /F350, 4 Link 8-Lug, 4WD includes: The 6" 4-Link design by RCD eliminates the factory radius arms using heavy duty 2"x.125" swaged DOM tubing Link bars. These bars utilize high articulation urethane encased flex joints at the frame mounts and 1/4" plate steel Clevis at the axle. The flex joints are greasable via gun drilled pivot bolts and Zerk fittings. A one-piece track bar drop bracket constructed of 3/8" plate steel ensures ultimate strength and precise axle location with bind-free axle articulation. A pitman arm is also included. The 4.25" factory style replacement rear block and u-bolt kit utilizes a 1-piece design with the bump stop wing cast into it and replaces the factory unit. No stacking of blocks required and proper compression bump travel is maintained. Four Fox shocks complete this package.

This kit is compatible with:

• 2005 - 2007 Ford F250 w/ Gase Engine - 4WD
• 2005 - 2007 Ford F250 - 4WD
• 2005 - 2007 Ford Excursion - 4WD

This kit includes:

• Radius arms & track bar drop down
• Coil springs
• Blocks
• Fox Performance Series Shock Absorbers
• 4-Link arms, driver side
• 4-Link arms, passenger side

Wheel/Tire Specifications:

• Max Tire Size: 36" x 12.5" - Minor fender/bumper trimming may be required.
• Max Backspace: 17" & larger x 8" - 4.625" backspacing.

Additional Information:

• Will NOT work with Air Ride or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Ford Dealer
• Vehicles equipped with two-piece driveline may require Drive Shaft Support Drop Down Bracket for the factory carrier bearing. See below.
• Rear ride height may vary on certain models depending on the height of the factory block. Additional rear lift may be required on certain models.
• Factory Steering Stabilizers are not retained. Heavy duty replacement is required. Call or email for recommendations.

Click Here to see this Kit with Bilstein Shock Absorbers

4" Suspension System w/ Fox Performance Series Shock Absorbers, 2008 - 2010 Ford F250/F350 4WD, Non-Dually

Part #: 10-42408

MSRP $1,670.00 USD

The launch of the all new Ford "Super Duty" in 2001 brought a frenzy of excitement to Blue Oval truck enthusiasts. A new diesel motor and solid axle front suspension lent itself to ease of modification and RCD Suspension capitalized on this new and popular platform. 2005 brought a whole new platform, eliminating the poor riding leaf springs and putting coils and radius arms in their place. RCD Suspension engineers capitalized on this and put together three systems, 2" Leveling, 4" Standard, and the premium 6" Long Arm 4 Link Conversion Kit. RCD Suspension continues to produce systems for most F-250 / F-350 models from 2001 through 2008 model years.

The RCD 4" Suspension System for the 2008-2010 Ford F250 / 350 8-Lug, 4WD includes: Progressive rate coil springs made from high quality U.S. spring steel, providing long life, and superior ride characteristics; Fox Performance Series shock absorbers; heavy duty 1/4" thick mounting brackets provide enhanced strength and alignment characteristics; 3/8" plate steel extreme duty track bar drop bracket eliminates bump steer and provides the ultimate in strength and durabilit; forged steel drop pitman arm maintains precise steering geometry; extended sway bar links provide factory mounting locations and proper sway bar function; stainless steel extended front brake lines; and unique "Gator Black" polyurethane powder coat finish.

This kit is compatible with:

• 2008 - 2010 Ford F250 4WD (Non-Dually)
• 2008 - 2010 Ford F350 4WD (Non-Dually)

This kit includes:

• Radius arms & track bar drop down
• Coil springs
• Blocks
• Fox Performance Series Shock Absorbers

Wheel/Tire Specifications:

• Max Tire Size: 35" x 12.5" - Minor fender and/or bumper trimming may be required.
• Max Backspace: 16" & larger x 8" - 4.625" backspace.

Additional Information:

• Will NOT work with Air Ride or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Ford Dealer
• Vehicles equipped with two-piece driveline may require Drive Shaft Support Drop Down Bracket for the factory carrier bearing. See below.
• Rear ride height may vary on certain models depending on the height of the factory block. Additional rear lift may be required on certain models.

Click Here to see this Kit with Bilstein Shock Absorbers

3" Suspension System w/ Fox 2.0 Performance IFP Shock Absorbers - Dodge Ram 2500, 4wd

Part #: 10-46203-F

MSRP: $1,140.00 USD

Dodge has come a long way over the years, continuing to improve both its quality and strength. The late model 8 lug platform has become a mainstay with truck consumers, especially with the Cummins Diesel crowd. The ever popular solid axle front end continues to perform well and lends itself to be modified with a good deal of aftermarket products. RCD Suspension has utilized its high quality design and manufacturing capability to produce a system that both rides and performs whether on the street or in the dirt. 94-02 1500 & 2500 4wd solid axle vehicles get a "long arm" style system, while the 03-08 2500 4wd utilizes a similar system in a short arm kit.

The RCD 3" Suspension System for the 2003 - 2013 Dodge Ram 2500, 4WD with Fox Performance Series Shocks Includes: 3" Spacer; bumpstops to improve the ride and protect the suspension; and an extreme, high-quality RCD control arm that replaces the factory control arm; yet retains the factory ride.

This kit is compatible with:

• 2003-2013 Dodge Ram 2500 - 4WD

5"-6" Suspension System w/ Fox 2.0 Performance IFP Shock Absorbers, 1999 - 2011 Chevrolet / GMC, K1500HD*, 2500 & 2500 Avalanche, Yukon, Suburban, 2WD & 4WD (*C1500HD 01-06 models only)

Part #: 10-41899-F

" Race Car Dynamics has been building some of the finest GM kits for the Chevrolet and GMC vehicles for years.Over the years RCD's attention to detail and quality construction has produced robust and reliable products. Major competitive advantages of the RCD suspension lift systems are their simplicity and the use of Bilstein 5100 series shock absorbers. No replacement front driveshaft is needed for Auto-Trac equipped vehicles and installation is relatively easy compared to other more complicated kits.

The RCD 6"" Suspension System for the 1999-2011 Chevy/GMC 8-lug, 1500, 2500 (Non HD) & 2500 Avalanche, Yukon, & Suburban, 2WD & 4WD, Standard Torsion Bar Suspension (Non Delphi Auto) (*1500HD 01-06 models only) includes: CNC machined replacement cast iron steering knuckles, T-6 billet aluminum axle spacers, zinc plated billet steel ""Super-Flex"" sway bar end links, replacement heavy duty lower link arms, rear coil spring, shock absorber relocation bracketry, Bisltein 5100 Series Shock Absorbers. Note: no drive shaft modifications are needed for installation."

This kit is compatible with:

• 1999-2011 GMC K1500HD - 4WD
• 2001-2006 GMC C1500HD- 4WD
• 1999-2011 GMC K2500 Pickup - 4WD
• 1999-2012 Suburban/Avalanche/Yukon - 4WD

This suspension system includes:

• Front & Rear Crossmember
• Front Spindles
• Lateral Compression Strut Kit
• Main Kit
• Add-a-Leaf Kit (K2500 Pickup only)
• Fox Performance Series Shocks

0" - 2" Leveling Kit, w/ Fox Factory Series Shock Absorbers & coils, 2010 - 2013 Toyota FJ Cruiser 2WD & 4WD

Part #: 880-02-361

MSRP: $1,080.00 USD

0" - 2" Leveling Kit, w/ Fox Factory Series Shock Absorbers & coils, 2001 -2008 Toyota 200 Landcruiser

Part #: 883-02-030

MSRP: $1,080.00 USD

0" - 3" Leveling Kit, w/ Fox Factory Series Shock Absorbers & coils, 2010 - 2013 Toyota 4Runner 2WD & 4WD*

Part #: 883-02-025

MSRP: $1,080.00 USD

*Requires aftermarket upper control arm

0" - 2" Leveling Kit, w/ Fox Factory Series Shock Absorbers & coils, 2010 - 2013 Toyota 4Runner 2WD & 4WD

Part #: 880-02-361

MSRP: $1,080.00 USD

0" - 2" Leveling Kit w/ Fox Factory Series Shock Absorbers & coils, 2009 - 2013 Ford F150 4WD

Part #: 883-02-029

MSRP: $1080.00 USD

4"-6" Suspension System w/ Fox 2.0 Performance IFP Shock Absorbers for the 2011-2014 GMC 2500HD, 8-Lug, Independent Front Suspension

Part #: 10-41811-F

This kit is compatible with:

2011-2014 GMC 2500HD Pickup - 4WD & 2WD

This suspension system includes:

• Front & Rear Crossmembers
• Driver Spindles
• Lateral Compression Strut Kit
• Main Kit
• Rear Kit
• Passenger Spindle
• Fox Performance Series Shocks

Wheel/Tire Specifications:

• Max Tire Size: 33” x 12.5” w/ no modifications necessary
• 35” & larger x 12.5” require minor bumper and/or fender trimming
• Max Backspace:
• 16” x 8” - 4.5” backspacing 17” & larger x 8” = 4.625” backspacing

Additional Information:

• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized GMC/Chevy Dealer
• Must enlarge lower control arm sway bar end link mounting hole to 3/4”
• Will not work on vehicles equipped with rear steering

Click here to see this kit with Bilstein Shock Absorbers

0" - 3" Leveling Kit, w/ Fox Factory Series Shock Absorbers & coils, 1995 - 2004 Toyota Tacoma 4WD*

Part #: 883-02-023

MSRP: $1,080.00 USD

*Requires aftermarket upper control arm

0" - 3" Leveling Kit, w/ Fox Factory Series Shock Absorbers & coils, 2010 - 2013 Toyota FJ Cruiser 2WD & 4WD*

Part #: 883-02-025

MSRP: $1,080.00 USD

*Requires aftermarket upper control arm