3500 Suspension

0" - 2.5" RCD Leveling Kit, w/ Bilstein 5100 Series Shock Absorbers, Front Adjustable, 1999 - 2010 Chevy/GMC Silverado K1500HD/K2500/K2500HD/K3500

Part #: 10-41803

MSRP: $504.00 USD

*This kit works on trucks with RPO codes FK2 - FK3 - FF6 - FF7 - FF8 - FF9

The RPO code can be found on the door jam sticker. This sticker will include the VIN and multiple three digit codes.

0" - 2.5" RCD Leveling Kit w/ Bilstein 5100 Series Shock Absorbers, Front Adjustable, 1999 - 2007 Chevy/GMC Silverado, Tahoe, Avalanche, Suburban, Sierra, Yukon

4WD

Part #: 10-41399

MSRP: $522.00 USD

0" - 2.5" RCD Leveling Kit, w/ Bilstein 5100 Series Shock Absorbers, Front Adjustable, 1999 - 2010 Chevy/GMC Silverado K1500HD/K2500/K2500HD/K3500

Part #: 10-41802

MSRP: $504.00 USD

*This kit works on trucks with RPO codes FT2 - FT3 - FT4 - FT5 - FT6 - FT7

The RPO code can be found on the door jam sticker. This sticker will include the VIN and multiple three digit codes.

0" - 1.5" RCD Leveling Kit w/ Bilstein 5100 Series Shock Absorbers, Front Adjustable, 2011 - 2013 Chevy/GM Silverado 2500 HD, Sierra 2500/3500 HD

Part #: 10-41812

MSRP: $648.00 USD

6" Suspension System w/ Bilstein 5100 Series Shock Absorbers, 1999 - 2010 Chevrolet / GMC, 2500HD, 3500 2WD & 4WD, Standard Torsion Bar Suspension,

Part #: 10-41800

MSRP: $2,255.00 USD

Like the robust 2500 HD platform, the Chevrolet & GMC 8-Lug platform has been a cornerstone for over two decades. The classic GM IFS suspension technology has been proven time and again to provide exceptional handling characteristics and performance. RCD Suspension, with its industry leading sub-frame and spindle technology, has capitalized on this platform to produce a high quality product that exceeds even the most discerning customer needs. RCD Suspension continues to produce these systems for all 1988 through 2008 GM IFS truck and SUV models.

The RCD 6" Suspension System for the 1999-2011 Chevy/GMC 8-lug, 2500HD, 3500 (Single Rear Wheel), Avalanche, Yukon, Suburban, 2WD & 4WD includes: CNC machined replacement cast iron steering knuckles, T-6 billet aluminum axle spacers, zinc plated billet steel "Super-Flex" sway bar end links, replacement heavy duty lower link arms, rear coil spring, shock absorber relocation bracketry, Bisltein 5100 Series Shock Absorbers, and Standard Torsion Bar Suspension (Non Delphi Auto). Note: no drive shaft modifications are needed for installation

This kit is compatible with:

• 1999-2010 GMC K2500HD - 4WD
• 1999-2010 GMC K3500 - 4WD

(Manufacturing date of 7/2000 or later)

This kit includes:

• Front & rear crossmembers
• Front spindle
• Lateral compression strut kit
• Main kit
• Bilstein 5100 Series Shock Absorbers

Wheel/Tire Specifications:

• Max Tire Size: 33" x 12.5" w/ no modifications necessary. 35" & larger x 12.5" require minor fender and/or bumper trimming.
• Max Backspace: 16" x 8" - 4.5" backspacing. 17" & larger x 8" = 4.625" backspacing.

Additional Information:

• Vehicles equipped with two piece rear drive shaft may require 20-68747 Drive Shaft Support Drop Down Bracket for the factory carrier bearing
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized GMC/Chevy Dealer
• Must enlarge lower control arm sway bar end link mounting hole to 3/4”
• Will not work on vehicles equipped with rear steering
• Some models may require an exhaust modification to clear the front drive shaft
• Will NOT work with Air Ride or Electronic Suspension Systems
• Single rear wheel only / Non-dually

Click Here to see this Kit with Fox Shock Absorbers

6" Suspension System w/ Bilstein 5100 Series Shock Absorbers 1988 - 1999 Chevrolet / GMC, 2500, 3500, K Series Pick Up & Suburban 4WD, Standard Torsion Bar Suspension (*K Series Old Body Style Only)

Part #: 10-41888

MSRP: $2,245.00 USD

Race Car Dynamics has been building some of the finest GM kits for the Chevrolet and GMC vehicles for years.Over the years RCD's attention to detail and quality construction has produced robust and reliable products. Major competitive advantages of the RCD suspension lift systems are their simplicity and the use of Bilstein 5100 series shock absorbers. No replacement front driveshaft is needed for Auto-Trac equipped vehicles and installation is relatively easy compared to other more complicated kits.

The RCD 6" Suspension System for the 1988 - 2000 Chevy/GMC 8-lug, 2500, 3500 (Single Rear Wheel) K Series Pick Up & Suburban, 4WD, Standard Torsion Bar Suspension (*K Series Old Body Style Only) includes: CNC machined replacement cast iron steering knuckles, T-6 billet aluminum axle spacers, zinc plated billet steel "Super-Flex" sway bar end links, replacement heavy duty lower link arms, rear coil spring, shock absorber relocation bracketry, and Bisltein 5100 Series Shock Absorbers. Note: no drive shaft modifications are needed for installation

This kit includes:

• Front & rear crossmembers
• Front spindles
• Lateral compression strut kit
• Main kit
• Add-a-leaf kit
• Bilstein 5100 Series Shock Absorbers

Wheel/Tire Specifications:

• Max Tire Size: 33" x 12.5" w/ no modifications necessary. 35" & larger x 12.5" require minor fender and/or bumper trimming.
• Max Backspace: 16" x 8" - 4.5" backspacing. 16.5" & larger x 8" = 4.75" backspacing.

Additional Information:

• Will NOT work with Air Ride or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized GMC/Chevy Dealer
• Must enlarge lower control arm sway bar end link mounting hole to 3/4”
• Will not work on vehicles equipped with spindle mounted ABS sensor
• Some models may require an exhaust modification to clear the front driveshaft
• Vehicles equipped with two piece rear drive shaft may require 20-68747 Drive Shaft Support Drop Down Bracket for the factory carrier bearing . Other rear driveline modifications may be required.

6" Suspension System w/ Fox 2.0 Performance IFP Shock Absorbers - Chevrolet / GMC, 8-lug, 2500HD, 3500 (Single Rear Wheel), 2wd & 4wd, Standard Torsion Bar Suspension, (Non Delphi Auto)

Part #: 10-41800-F

MSRP: $2,265.00 USD

Like the robust 2500 HD platform, the Chevrolet & GMC 8-Lug platform has been a cornerstone for over two decades. The classic GM IFS suspension technology has been proven time and again to provide exceptional handling characteristics and performance. RCD Suspension, with its industry leading sub-frame and spindle technology, has capitalized on this platform to produce a high quality product that exceeds even the most discerning customer needs. RCD Suspension continues to produce these systems for all 1988 through 2008 GM IFS truck and SUV models.

The RCD 6" Suspension System for the 1999-2011 Chevy/GMC 8-lug, 2500HD, 3500 (Single Rear Wheel), Avalanche, Yukon, Suburban, 2WD & 4WD includes: CNC machined replacement cast iron steering knuckles, T-6 billet aluminum axle spacers, zinc plated billet steel "Super-Flex" sway bar end links, replacement heavy duty lower link arms, rear coil spring, shock absorber relocation bracketry, Fox 2.0 Performance IFP Shock Absorbers, and Standard Torsion Bar Suspension (Non Delphi Auto). Note: no drive shaft modifications are needed for installation.

This kit is compatible with:

• 1999-2010 GMC K2500HD - 4WD
• 1999-2010 GMC K3500 - 4WD

(Manufacturing date of 7/2000 or later)

This kit includes:

• Front & rear crossmembers
• Front spindle
• Lateral compression strut kit
• Main kit
• Fox 2.0 Performance Series Shock Absorbers

Wheel/Tire Specifications:

Max Tire Size: 33" x 12.5" w/ no modifications necessary. 35" & larger x 12.5" require minor fender and/or bumper trimming.

Max Backspace: 16" x 8" - 4.5" backspacing. 17" & larger x 8" = 4.625" backspacing.

Additional Information:

• Vehicles equipped with two piece rear drive shaft may require 20-68747 Drive Shaft Support Drop Down Bracket for the factory carrier bearing
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized GMC/Chevy Dealer
• Must enlarge lower control arm sway bar end link mounting hole to 3/4”
• Will not work on vehicles equipped with rear steering
• Some models may require an exhaust modification to clear the front drive shaft
• Will NOT work with Air Ride or Electronic Suspension Systems
• Single rear wheel only / Non-dually

Click Here to See this Kit with Bilstein Shock Absorbers