Tundra 2WD Suspension

0" - 3" Leveling Kit, w/ Fox Factory Series Shock Absorbers & coils, 2000 - 2006 Toyota Tundra 2WD & 4WD*

Part #: 883-02-027

MSRP: $1,080.00 USD

*Requries aftermarket upper control arm

0" - 2" Leveling Kit, w/ Fox Performance Series Shock Absorbers & coils, 2000 - 2006 Toyota Tundra 2WD & 4WD

Part #: 985-02-005

MSRP: $360.00 USD

0" - 2" Leveling Kit, w/ Fox Factory Series Shock Absorbers & coils, 2007 - 2013 Toyota Tundra 2WD & 4WD

Part #: 883-02-021

MSRP: $1,080.00 USD

0" - 2" Leveling Kit, w/ Fox Performance Series Shock Absorbers & coils, 2007 - 2013 Toyota Tundra 2WD & 4WD

Part #: 985-02-004

MSRP: $360.00 USD

0" - 2" Leveling Kit, w/ Fox Factory Series Shock Absorbers & coils, 2000 - 2006 Toyota Tundra 2WD & 4WD

Part #: 883-02-026

MSRP: $1,080.00 USD

0" - 2.5" Leveling Kit, Front Adjustable, w/ Bilstein 5100 Series Shock Absorbers, 1999 - 2006 Toyota Tundra 2WD & 4WD

Part #: [Front & Rear: 70-97199] [Front Only: 70-97999]

MSRP: [Front & Rear: $555.00 USD] [Front Only: $305.00 USD]

0" - 2.5" Leveling Kit, Front Adjustable, w/ Bilstein 5100 Series Shock Absorbers, 2007 - 2013 Toyota Tundra 2WD & 4WD

Part #: [Front & Rear: 70-97107] [Front only: 70-97807]

MSRP: [Front & Rear: $545.00 USD] [Front Only: $305.00 USD]

2" Suspension System w/ Bilstein Red Series Shock Absorbers, Front Only, 2000-2006 Toyota Tundra 4WD & 2WD

Part # 10-47000

MSRP: $290.00 USD

The growing use of "strut" type front ends on most 2WD & 4WD vehicle platforms, along with the demand for leveling kits is on the rise. RCD Suspension has worked closely with Bilstein Shock Absorbers to develop performance applications to fulfill the need, all at very competitive pricing compared to spacer kits.

Anyone can make a spacer kit; and, yes they are economical, but they add no performance to the application. RCD has taken the top applications, studied the vehicle platforms, and produced applications that maximize the usable travel of the vehicle's suspension system. By increasing the available travel by maximizing shock length, we are able to add "droop travel" and / or "compression travel" to the system. This increases ride quaility and performance substantially. In addition, spring preload is enhanced, increasing rate, improving the handling and performance, and eliminating the stock mushy feel.

The RCD 0 - 2" Leveling Kit for the 1999 - 2002 Toyota Tundra 2WD / 4WD includes: Custom tuned front ride height adjustable Bilstein monotube gas pressure shocks that feature: A 0- 2" ride height that is selected upon installation; and high quality, factory style mounting hardware ensuring trouble free performance on these load bearing shock assemblies. Additional features include: Direct fit, OEM style mounting hardware; easy installation and long life (strut style spring compressor is required); maximized wheel travel through improved shock length and stroke; improved performance utilizing increased spring rates and shock valving; and strut application utlizing multiple snap ring grooves allowing fine tuning or fide height and spring preload for various chassis combinations.

This kit is compatible with:

• 2000 - 2006 Toyota Tundra 2WD & 4WD 

This kit includes:

• Bilstein Red Series Shock Absorbers for Toyota (Front ONLY)

Wheel/Tire Specs:

• Max Tire Size: 33" x 12.5" - minor fender and/or bumper trimming may be required.
• Max Backspace: 16" & larger x 8" - maximum 4.5" backspacing.

Additional Information:

• Will NOT work with Air Ride and/or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Toyota Dealer
• Stock drive shaft retained
• Kit includes shocks only.
• Stock hardware is retained and reused
• Spring compressor tool required for installation

4"-6" Suspension System w/ Bilstein Shock Absorbers - 2000 - 2003 Toyota Tundra 4WD & 2WD

Part #: 10-47400

MSRP $2,990.00 USD

Toyota has been gaining momuentum in the truck market for many years and the Tundra has become a popular vehicle of choice for the consumer looking for a toy model in quality and reliability. The Tndra's suspension is complex. Toyota was the first manufacturer to incorporate "coilover strut) and rack and pinion suspension technolouy in a halp ton truck startin in 1999. RCD Suspension answered the challenge, developing one of our most technologically advanced and complete sysems to date. RCD Suspension offers systesm for all Tundra models from 1999 - 2013.

The RCD 6" Suspension System for the 2000 - 2003 [August] Toyota Tundra 2WD / 4WD includes: CNC Machined Replacement Cast Iron Steering Knuckles for Precise Steering Geometry, Heavy Duty Two Piece Lower Sub-Frame Cross Members that are Precision Formed from 1/4" Thick Plate Steel Insuring Structural Strength and Durability, polished 304 Stainless Steel "Twin-Link" Anti-Compression Struts Provide Additional Support and Exceptional Support. Replacement Bilstein 5100 Series Coil-Over Front Shocks for Superior Handling and Ride Characteristics. RCD "Gator Black" Polyurethane Powder Coat Finish for Lasting Good Looks. Grade 8 Hardware for Reliability. Steel Braided Front Brake Lines for Correct Length and Increased Braking Performance. Replacement Heavy Duty Front Sway Bar for Added Performance and Stability. Custom Matched Bilstein 5100 Series Monotube Gas Pressure Front & Rear Shocks.

This kit is compatible with:

• 2000 - 7/2003 Toyota Tundra 2WD & 4WD

(Manufacturing date must be before 7/2003)

This kit includes:

• Crossmembers
• Spindles
• Compression Struts
• Main kit
• Swaybar
• Bilstein 5100 Series Shock Absorbers
• Skid plate

Wheel/Tire Specifications:

• Max Tire Size: 33" x 12.5" - no modification necessary. 35" x 12.5" - minor fender and/or bumper trimming may be necessary.
• Max Backspace: 16" x 8" - 4" backspacing.

Additional Information:

• Will NOT work with Air Ride and/or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Toyota Dealer
• Stock drive shaft retained
• Kit will only fit vehicles manufactured before 8/2003 with small lower control arm and ball joint.
• Strut type coil spring compressor, a 20T hydraulic press, along with Toyota front end disassembly tools are required for installation.
• Front system is adjustable upon installation to either a 4” or a 6” ride height configuration.
• System features replacement steering knuckles with pre-installed factory Toyota wheel bearings.

4"-6" Suspension System w/ Bilstein 5100 Series Shock Absorbers, 8/2003 - 2006 Toyota Tundra 4WD & 2WD

Part #: 10-47404

MSRP: $2,990.00 USD

Toyota has been gaining momuentum in the truck market for many years and the Tundra has become a popular vehicle of choice for the consumer looking for a toy model in quality and reliability. The Tndra's suspension is complex. Toyota was the first manufacturer to incorporate "coilover strut) and rack and pinion suspension technolouy in a halp ton truck startin in 1999. RCD Suspension answered the challenge, developing one of our most technologically advanced and complete sysems to date. RCD Suspension offers systesm for all Tundra models from 1999 - 2013.

The RCD 6" Suspension System for the vehicles manufactured after September, 2003 Toyota Tundra 2WD / 4WD includes: CNC Machined Replacement Cast Iron Steering Knuckles for Precise Steering Geometry, Heavy Duty Two Piece Lower Sub-Frame Cross Members that are Precision Formed from 1/4" Thick Plate Steel Insuring Structural Strength and Durability, polished 304 Stainless Steel "Twin-Link" Anti-Compression Struts Provide Additional Support and Exceptional Support. Replacement Bilstein 5100 Series Coil-Over Front Shocks for Superior Handling and Ride Characteristics. RCD "Gator Black" Polyurethane Powder Coat Finish for Lasting Good Looks. Grade 8 Hardware for Reliability. Steel Braided Front Brake Lines for Correct Length and Increased Braking Performance. Replacement Heavy Duty Front Sway Bar for Added Performance and Stability. Custom Matched Bilstein 5100 Series Monotube Gas Pressure Front & Rear Shocks.

This kit is compatible with:

• 2003 - 2006 Toyota Tundra 2WD & 4WD
  (Manufacturing date must be after 8/2003)

This kit includes:

• Crossmembers
• Spindles
• Compression struts
• Main kit
• Sway bar
• Bilstein 5100 Series Shock Absorbers

Wheel/Tire Specifications:

• Max Tire Size: 33" x 12.5" - no modification necessary. 35" x 12.5" - some minor fender and/or bumber trimming may be required.
• Max Backspace: 16" & larger x 8" - maximum 4" backspace.

Additional Information:

• Will NOT work with Air Ride and/or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Toyota Dealer
• Stock drive shaft retained
• Vehicles produced between 8/2003 and 7/2004 will need short style steering yoke kit.
• Kit will only fit vehicles manufactured after 8/2003 with large lower control arm and ball joint.
• Strut type coil spring compressor, a 20T hydraulic press, along with Toyota front end disassembly tools are required for installation.
• Front system is adjustable upon installation to either a 4” or a 6” ride height configuration.
• System features replacement steering knuckles with pre-installed factory Toyota wheel bearings.

4"-6" Suspension System w/ Bilstein 5100 Series Shock Absorbers, 2007 - 2013 Toyota Tundra 4WD & 2WD

Part #: 10-47407

MSRP: $2,705.00 USD

This kit is compatible with:

• 2007 - 2013 Toyota Tundra 2WD & 4WD

This kit includes:

• Crossmembers
• Spindles
• Compression struts
• Main kit
• Bilstein 5100 Series Shock Absorbers

Wheel/Tire Specifications:

• Max Tire Size: 33" x 12.5" - no modification necessary. 35" x 12.5" - minor fender and/or bumper trimming may be required.
• Max Backspace: 18" x 9" - 5.5" backspacing.

Additional Information:

• Will NOT work with Air Ride and/or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Toyota Dealer