4WD

4" Suspension System w/ Fox Performance Series Shock Absorbers - 2005 - 2007 Ford F250 (Non-Dually)/F350 (Non-Dually)/Excursion 4WD

Part #: 10-42405-F

MSRP: $1,670.00 USD

The launch of the all new Ford "Super Duty" in 2001 brought a frenzy of excitement to Blue Oval truck enthusiasts. A new diesel motor and a new solid axle front suspension lent itself to ease of modification and RCD Suspension capitalized on this new and popular platform. 2005 brought a whole new platform, eliminating the poor riding leaf springs and putting coils and radius arms in their place. RCD Suspension engineers capitalized on this and put together three systems, 2" Leveling, 4" Standard, and the premium 6" Long Arm 4 Link Conversion Kit. RCD Suspension continues to produce systems for most F-250 / F-350 models from 2001 through 2008 model years.

The RCD 4" Suspension System for the 2005 - 2007 Ford F250 / 350 8-Lug, 4WD includes: Progressive rate coil springs made from high quality U.S. spring steel, providing long life, and superior ride characteristics; Fox Performance Series shock absorbers; heavy duty 1/4" thick mounting brackets provide enhanced strength and alignment characteristics; 3/8" plate steel extreme duty track bar drop bracket eliminates bump steer and provides the ultimate in strength and durabilit; forged steel drop pitman arm maintains precise steering geometry; extended sway bar links provide factory mounting locations and proper sway bar function; stainless steel extended front brake lines; and unique "Gator Black" polyurethane powder coat finish.

This kit is compatible with:

• 2005 - 2007 Ford Excursion - 4WD
• 2005 - 2007 Ford F250 - 4WD (Non-Dually)
• 2005 - 2007 Ford F350 - 4WD (Non-Dually)

This kit includes:

• Radius arms & track bar drop down
• Coil springs
• Blocks
• Fox Performance Series Shock Absorbers

Wheel/Tire Specifications:

• Max Tire Size: 35" x 12.5" - Minor fender and/or bumper trimming may be required.
• Max Backspace: 17" & larger x 8" - 4.625" backspacing.

Additional Information:

• Will NOT work with Air Ride or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Ford Dealer
• Vehicles equipped with two-piece driveline may require Drive Shaft Support Drop Down Bracket for the factory carrier bearing. See below.
• Rear ride height may vary on certain models depending on the height of the factory block. Additional rear lift may be required on certain models.
• Factory Steering Stabilizers are not retained. Heavy duty replacement is required. Call or email for recommendations.

Click Here to see this Kit with Bilstein Shock Absorbers

4"-6" Suspension System w/ Fox Performance Series Shock Absorbers - 2009 - 2013 Ford F150 Crew Cab 4WD

Part # 10-42409-F

This kit is compatible with:

• 2009 - 2013 Ford F150 - 4WD

4"-6" Suspension System w/ Fox 2.0 Performance IFP Shock Absorbers for the 2011-2014 GMC 2500HD, 8-Lug, Independent Front Suspension

Part #: 10-41811-F

This kit is compatible with:

2011-2014 GMC 2500HD Pickup - 4WD & 2WD

This suspension system includes:

• Front & Rear Crossmembers
• Driver Spindles
• Lateral Compression Strut Kit
• Main Kit
• Rear Kit
• Passenger Spindle
• Fox Performance Series Shocks

Wheel/Tire Specifications:

• Max Tire Size: 33” x 12.5” w/ no modifications necessary
• 35” & larger x 12.5” require minor bumper and/or fender trimming
• Max Backspace:
• 16” x 8” - 4.5” backspacing 17” & larger x 8” = 4.625” backspacing

Additional Information:

• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized GMC/Chevy Dealer
• Must enlarge lower control arm sway bar end link mounting hole to 3/4”
• Will not work on vehicles equipped with rear steering

Click here to see this kit with Bilstein Shock Absorbers

4"-6" Suspension System w/ Bilstein 5100 Series Shock Absorbers for the 2011-2014 GMC 2500HD, 8-Lug, Independent Front Suspension

Part #: 10-41811

MSRP: $2,560.00 USD

This kit is compatible with:

2011-2014 GMC 2500HD Pickup - 4WD & 2WD

This suspension system includes:

• -Front & Rear Crossmembers
• -Driver Spindles
• -Lateral Compression Strut Kit
• -Main Kit
• -Rear Kit
• -Passenger Spindle
• -Bilstein 5100 Series Shocks

Wheel/Tire Specifications:

• Max Tire Size: 33” x 12.5” w/ no modifications necessary
• 35” & larger x 12.5” require minor bumper and/or fender trimming
• Max Backspace:
• 16” x 8” - 4.5” backspacing 17” & larger x 8” = 4.625” backspacing

Additional Information:

• -Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized GMC/Chevy Dealer
• -Must enlarge lower control arm sway bar end link mounting hole to 3/4”
• -Will not work on vehicles equipped with rear steering

FAQ:

• How tall is the rear block on the 10-41811? Answer 4”
• Answer: 4"
• How much is the front differential dropped on the 10-41811?
• Answer: 6"

Click here to See This Kit with Fox Shock Absorbers

2" Leveling Kit, 1999 - 2001 Ford F250/F350 4WD

Part #: 10-42200

MSRP: $405.00 USD

RCD Suspension was bred from a heritage of competition, off-road design and manufacturing. With the growing use of "strut" type front ends and the demand for leveling kits is on the rise, RCD Suspension has worked closely with Bilstein Shock Absorbers to develop performance applications to fulfill the need -- all at very competitive pricing compared to spacer kits. Race Car Dynamics continues to manufacture the most technically advanced suspension systems available today for Trucks and SUVs. At RCD Suspension we focus on building the finest suspension systems available. Don't just lift your truck, take a systems approach and find out why RCD manufactures the highest quality, best handling suspension systems for today's 2WD / 4WD trucks & SUVs.

1999-2004 2" Leveling Shack Kit - Ford F250 / F350 8-Lug, 4WD (Does Not Include Shocks) features: Progressive rate coil springs are made from high-quality U.S. spring steel providing long life and superior ride characteristics and Unique "Gator Black" polyurethane powder coat finish.

This kit is compatible with:

• 1999 - 2001 Ford F250 (Non-Dually) 4WD
• 1999 - 2001 Ford F350 (Non-Dually) 4WD
• 1999 - 2001 Ford Excursion 4WD

This kit includes:

• Bracket, Driver Side Front Spring Hanger
• Bracket, Passenger Side Front Spring Hanger
• Bracket, Spring Shackle
• Bracket, Driver Side Crashbar Superduty
• Bracket, Passenger Side Crashbar Superduty

Wheel/Tire Specifications:

• Max Tire Size: 33" x 12.5" w/ no modifications necessary.

Additional Information:

• DO NOT USE WHEEL SPACERS
• Front-end realignment is necessary.
• Speedometer recalibration is necessary if larger tires (10% larger than stock diameter) are installed.
• No driveline modifications necessary.
• Headlights will have to be adjusted after install.

4" Suspension System w/ Bilstein 5100 Series Shock Absorbers, 2005 - 2013 Toyota Tacoma 4WD & 2WD

Part #: 10-47405

MSRP: $2,530.00 USD

This kit is compatible with:

• 2005 - 2013 Toyota Tacoma 2WD & 4WD

This kit includes:

• Crossmembers
• Spindles
• Compression struts
• Main kit
• Bilstein 5100 Series Shock Absorbers
• Skid Plate 

Wheel/Tire Specifications:

• Max Tire Size: 33" x 12.5" - Minor fender and/or bumper trimming may be required.
• Max Backspace: 16" & larger x 8" - 4.5" backspacing. 

Additional Information:

• Will NOT work with Air Ride and/or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Toyota Dealer
• Stock drive shaft retained

4"-6" Suspension System w/ Bilstein 5100 Series Shock Absorbers, 8/2003 - 2006 Toyota Tundra 4WD & 2WD

Part #: 10-47404

MSRP: $2,990.00 USD

Toyota has been gaining momuentum in the truck market for many years and the Tundra has become a popular vehicle of choice for the consumer looking for a toy model in quality and reliability. The Tndra's suspension is complex. Toyota was the first manufacturer to incorporate "coilover strut) and rack and pinion suspension technolouy in a halp ton truck startin in 1999. RCD Suspension answered the challenge, developing one of our most technologically advanced and complete sysems to date. RCD Suspension offers systesm for all Tundra models from 1999 - 2013.

The RCD 6" Suspension System for the vehicles manufactured after September, 2003 Toyota Tundra 2WD / 4WD includes: CNC Machined Replacement Cast Iron Steering Knuckles for Precise Steering Geometry, Heavy Duty Two Piece Lower Sub-Frame Cross Members that are Precision Formed from 1/4" Thick Plate Steel Insuring Structural Strength and Durability, polished 304 Stainless Steel "Twin-Link" Anti-Compression Struts Provide Additional Support and Exceptional Support. Replacement Bilstein 5100 Series Coil-Over Front Shocks for Superior Handling and Ride Characteristics. RCD "Gator Black" Polyurethane Powder Coat Finish for Lasting Good Looks. Grade 8 Hardware for Reliability. Steel Braided Front Brake Lines for Correct Length and Increased Braking Performance. Replacement Heavy Duty Front Sway Bar for Added Performance and Stability. Custom Matched Bilstein 5100 Series Monotube Gas Pressure Front & Rear Shocks.

This kit is compatible with:

• 2003 - 2006 Toyota Tundra 2WD & 4WD
  (Manufacturing date must be after 8/2003)

This kit includes:

• Crossmembers
• Spindles
• Compression struts
• Main kit
• Sway bar
• Bilstein 5100 Series Shock Absorbers

Wheel/Tire Specifications:

• Max Tire Size: 33" x 12.5" - no modification necessary. 35" x 12.5" - some minor fender and/or bumber trimming may be required.
• Max Backspace: 16" & larger x 8" - maximum 4" backspace.

Additional Information:

• Will NOT work with Air Ride and/or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Toyota Dealer
• Stock drive shaft retained
• Vehicles produced between 8/2003 and 7/2004 will need short style steering yoke kit.
• Kit will only fit vehicles manufactured after 8/2003 with large lower control arm and ball joint.
• Strut type coil spring compressor, a 20T hydraulic press, along with Toyota front end disassembly tools are required for installation.
• Front system is adjustable upon installation to either a 4” or a 6” ride height configuration.
• System features replacement steering knuckles with pre-installed factory Toyota wheel bearings.

4"-6" Suspension System w/ Bilstein Shock Absorbers - 2000 - 2003 Toyota Tundra 4WD & 2WD

Part #: 10-47400

MSRP $2,990.00 USD

Toyota has been gaining momuentum in the truck market for many years and the Tundra has become a popular vehicle of choice for the consumer looking for a toy model in quality and reliability. The Tndra's suspension is complex. Toyota was the first manufacturer to incorporate "coilover strut) and rack and pinion suspension technolouy in a halp ton truck startin in 1999. RCD Suspension answered the challenge, developing one of our most technologically advanced and complete sysems to date. RCD Suspension offers systesm for all Tundra models from 1999 - 2013.

The RCD 6" Suspension System for the 2000 - 2003 [August] Toyota Tundra 2WD / 4WD includes: CNC Machined Replacement Cast Iron Steering Knuckles for Precise Steering Geometry, Heavy Duty Two Piece Lower Sub-Frame Cross Members that are Precision Formed from 1/4" Thick Plate Steel Insuring Structural Strength and Durability, polished 304 Stainless Steel "Twin-Link" Anti-Compression Struts Provide Additional Support and Exceptional Support. Replacement Bilstein 5100 Series Coil-Over Front Shocks for Superior Handling and Ride Characteristics. RCD "Gator Black" Polyurethane Powder Coat Finish for Lasting Good Looks. Grade 8 Hardware for Reliability. Steel Braided Front Brake Lines for Correct Length and Increased Braking Performance. Replacement Heavy Duty Front Sway Bar for Added Performance and Stability. Custom Matched Bilstein 5100 Series Monotube Gas Pressure Front & Rear Shocks.

This kit is compatible with:

• 2000 - 7/2003 Toyota Tundra 2WD & 4WD

(Manufacturing date must be before 7/2003)

This kit includes:

• Crossmembers
• Spindles
• Compression Struts
• Main kit
• Swaybar
• Bilstein 5100 Series Shock Absorbers
• Skid plate

Wheel/Tire Specifications:

• Max Tire Size: 33" x 12.5" - no modification necessary. 35" x 12.5" - minor fender and/or bumper trimming may be necessary.
• Max Backspace: 16" x 8" - 4" backspacing.

Additional Information:

• Will NOT work with Air Ride and/or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Toyota Dealer
• Stock drive shaft retained
• Kit will only fit vehicles manufactured before 8/2003 with small lower control arm and ball joint.
• Strut type coil spring compressor, a 20T hydraulic press, along with Toyota front end disassembly tools are required for installation.
• Front system is adjustable upon installation to either a 4” or a 6” ride height configuration.
• System features replacement steering knuckles with pre-installed factory Toyota wheel bearings.

4"-6" Suspension System w/ Bilstein 5100 Series Shock Absorbers, 2007 - 2013 Toyota Tundra 4WD & 2WD

Part #: 10-47407

MSRP: $2,705.00 USD

This kit is compatible with:

• 2007 - 2013 Toyota Tundra 2WD & 4WD

This kit includes:

• Crossmembers
• Spindles
• Compression struts
• Main kit
• Bilstein 5100 Series Shock Absorbers

Wheel/Tire Specifications:

• Max Tire Size: 33" x 12.5" - no modification necessary. 35" x 12.5" - minor fender and/or bumper trimming may be required.
• Max Backspace: 18" x 9" - 5.5" backspacing.

Additional Information:

• Will NOT work with Air Ride and/or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Toyota Dealer

2" Suspension System w/ Bilstein 5100 Series Shock Absorbers, 1984 - 2001 Jeep Cherokee XJ 4WD & 2WD

Part #: 10-45284

MSRP: $750.00 USD

All RCD Jeep Suspension lift kits are made in the USA and provide optimum performance using the finest and most durable materials available. To champion other than the beaten path, you need plenty of determination, substantial ground clearance, and supreme endurance. When you want to pack in aesthetics with enhanced ground clearance, the RCD Jeep Suspension lift kit is the ticket.

The 2 inch lift kit by RCD for the Jeep Cherokee is a bargain solution for allowing larger tires and better off-road ability. The kit includes 2” lift coil springs, rear leaf spring shackles, replacement front bump stops, and custom tuned front and rear Bilstein 5100 Monotube shocks.

This kit is compatible with:

• 1984 - 2001 Jeep Cherokee XJ 2WD & 4WD

This kit includes:

• Main kit
• Front Coil Springs
• Bilstein 5100 Series Shock Absorbers

 Wheel/Tire Specifications:

• Max Tire Size: 30" x 9.5" - no modification necessary.
• Max Backspace: Stock Wheel.

Additional Information:

• Will NOT work with Air Ride and/or Electronic Suspension Systems
• Actual ride may vary based upon vehicle model and accessories installed (i.e. winch, bumpers, etc.)
• Alignment is required and aftermarket “Cam Eccentrics” may be required to achieve proper camber/caster adjustment.
• Stock drive shaft retained

4" Suspension System w/ Bilstein Shock Absorbers - 1984 - 2001 Jeep Cherokee XJ

Part #: 10-45584

MSRP: $2,820.00 USD

All RCD Jeep Suspension lift kits are made in the USA and provide optimum performance using the finest and most durable materials available. To champion other than the beaten path, you need plenty of determination, substantial ground clearance, and supreme endurance. When you want to pack in aesthetics with enhanced ground clearance, the RCD Jeep Suspension lift kit is a prime favorite. 

The RCD 4” long arm suspension kit for the XJ is engineered to greatly improve the ride quality and off-road ability for the Jeep Cherokee. By lengthening the control arms on the front suspension, articulation is increased and everyday driving comfort is improved. This kit includes a new cross member and extended length control arms, custom tuned Bilstein 5100 mono tube shocks replacement front trac-bar, front sway bar disconnects, extended rear sway bar links, stainless steel brake lines, long rear add-a-leafs, front bump stop extensions and rear replacement bump stops.

This kit is compatible with:

• 1984 - 2001 Jeep Cherokee XJ

This kit includes:

• Main kit
• Front coil springs
• Transfer skids
• Links
• Add-a-leaf kit
• Bilstein 5100 Series Shock Absorbers

Wheel/Tire Specifications:

• Max Tire Size: 31" x 10.5" - no modification necessary
• Max Backspace: 15" x 7" - 4.5" backspacing 

Additional Information:

• Will NOT work with Air Ride and/or Electronic Suspension Systems
• Actual ride may vary based upon vehicle model and accessories installed (i.e. winch, bumpers, etc.)
• Alignment is required and aftermarket “Cam Eccentrics” may be required to achieve proper camber/caster adjustment.
• Stock drive shaft retained. Models with 13” rear driveline may require drive shaft lengthening

4" Suspension System w/ Bilstein Shock Absorbers - 1984 - 2001 Jeep Cherokee XJ

Part #: 10-45484

MSRP: $1,785.00 USD

All RCD Jeep Suspension lift kits are made in the USA and provide optimum performance using the finest and most durable materials available. To champion other than the beaten path, you need plenty of determination, substantial ground clearance, and supreme endurance. When you want to pack in aesthetics with enhanced ground clearance, the RCD Jeep Suspension lift kit is a prime favorite.

The RCD 4” short arm suspension kit is the perfect suspension upgrade to add articulation and off-road performance to your Jeep Cherokee. This kit includes, 4” lift coil springs, long rear add-a-leafs, upper and lower control arms featuring RCD’s Flex Joints, front bump stop extensions, rear bump stops, front sway bar links, rear shackles and brake line mount extensions.

This kit is compatible with:

• 1984 - 2001 Jeep Cherokee XJ

This kit includes:

-Main kit

-Front coil springs

-Add-a-leaf kit

-Bilstein 5100 Series Shock Absorbers

Wheel/Tire Specifications:

Max Tire Size: 31" x 10.5" - No modification necessary.

Max Backspace: 15" x 7" - 4.5" backspacing.

Additional Information:

-Will NOT work with Air Ride and/or Electronic Suspension Systems
-Actual ride may vary based upon vehicle model and accessories installed (i.e. winch, bumpers, etc.)
-Alignment is required and aftermarket “Cam Eccentrics” may be required to achieve proper camber/caster adjustment.
-Stock drive shaft retained

4" Suspension System w/ Bilstein Shock Absorbers, 1999 - 2004 Ford F250/F350 2WD (Non-Dually) - Gas Engine

Part #: 10-42399

MSRP: $1,245.00 USD

RCD builds lift kits for owners that really want their truck to perform offroad,without sacificing aesthetics. RCD components are engineered to work together, using quality components and Bilstein shocks. There's no need to worry about mix-and-matching, the kits are easy to install, order, and are comprehensive. RCD's focus is on quality kits that include everything you need in a suspension lift kit. Available for popular 4WD and 2WD domestic truck, Jeep, and Toyota applications.

The RCD 4" Suspension System for the 1998-2004 Ford F250 / 350 8-Lug, 2WD includes: Two Progressive Rate Coil Springs; Hot Wound, Shot Peened and Pre-Set (Each coil spring is fully tested and inspected prior to shipment, a RCD Suspension exclusive) Maintains Smooth, Comfortable Ride while Increasing Wheel Travel 20%, Heavy Duty Drop Down Sub-Frame Assembly Maintains Factory Geometry for Precise Steering and Proper Alignment, "Twin-Link" Anti-Compression Struts Insure Structural Strength and Durability, RCD "Gator Black" Polyurethane Powder Coat Finish for Lasting Good Looks , Grade 8 Hardware for Reliability -Four Custom Matched Bilstein Monotube Gas Pressure Shocks for Maximum Performance and Ride Characteristics

This kit is compatible with:

• 1999 - 2004 Ford F250, 2WD - (Non-Dually) - Gas Engine
• 1999 - 2004 Ford F350, 2WD - (Non-Dually) - Gas Engine

This kit includes:

• Main kit
• Drop brackets
• Coil Springs
• Bilstein 5100 Series Shock Absorbers

Wheel/Tire Specifications:

• Max Tire Size: 33" x 12.5" - no modifications necessary. 35" x 12.5" - minor fender/bumper trimming required.
• Max Backspace: 16.5" x 9.75"

Additional Information:

• Will NOT work with Air Ride or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Ford Dealer
• Retains factory sway bar.

5" Suspension System w/ Bilstein 5100 Series Shock Absorbers, 1997 - 2003 Ford F150, w/E4OD Transmission, 4WD

Part #: 10-42098

MSRP: $2,185.00 USD

The RCD 5" Suspension System for the 1997-2003 Ford F150 w/E4OD Transmission 4WD includes:

CNC machined replacement cast iron steering knuckles, heavy duty one piece differential skid plate, machined aluminum front driveline and axle hardware, factory style rear block and U-bolt assembly (no "Stacking" of blocks) custom tuned front ride height adjustable Bilstein monotube gas pressure shocks that feature: A 4.5" or 6" ride height can be selected upon installation; and high quality, factory style mounting hardware that ensures trouble free performance on these load bearing shock assemblies.

This kit is compatible with:

• 1997 - 2003 Ford F150 - 4WD w/ E4OD Transmission

This kit includes:

• Front & rear crossmembers
• Front spindles
• Main kit
• Bilstein 5100 Series Shock Absorbers
• Add-a-leaf kit

Wheel/Tire Specifications:

• Max Tire Size: 35" x 12.5" - Minor trimming may be required.
• Max Backspace: 16" & larger x 8" - 4.625" backspacing*

Additional Information:

• Will NOT work with Air Ride or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Ford Dealer
• Verify transmission type by measuring transmission oil pan. E4OD measures approximately 13” x 23” and is rectangular shape. Will not work on short style equipped with 4R70W transmission. See part # 10-42097.
• *Super Crew application may only achieve 4” of lift due to torsion bar system. Maximum 33” x 12.5” tires on 16” x 8” wheels are recommended. 35” x 12.5” tires will require fender trimming.
• Factory driveshaft is retained
• Vehicles equipped with manual transmissions may not be able to use lateral compression struts.

4" - 6" Suspension System w/ Bilstein 5100 Series Shock Absorbers - 2004 - 2008 Ford F150, 4WD

Part #: 10-42404

MSRP: $3,105.00 USD

RCD builds lift kits for owners that really want their truck to perform offroad,without sacificing aesthetics. RCD components are engineered to work together, using quality components and Bilstein shocks. There's no need to worry about mix-and-matching, the kits are easy to install, order, and are comprehensive. RCD's focus is on quality kits that include everything you need in a suspension lift kit. Available for popular 4WD and 2WD domestic truck, Jeep, and Toyota applications.

The RCD 6" Suspension System for the 2004 - 2008 Ford F150 4WD includes: CNC Machined Replacement Cast Iron Steering Knuckles for Precise Steering Geometry, Heavy Duty Two Piece Lower Sub-Frame Cross Members are Precision Formed from 1/4" Thick Plate Steel Insuring Structural Strength and Durability, polished 304 Stainless Steel "Twin-Link" Anti-Compression Struts Provide Additional Support and Exceptional Support.
Machined Aluminum Front Driveline and Axle Hardware Insure Proper Fit and Function of the Front Drive-Train. Custom Tuned Front Ride Height Adjustable Bilstein Monotube Gas Pressure Shocks Feature: RCD "Gator Black" Polyurethane Powder Coat Finish for Lasting Good Looks, A 4.5" or 6" Ride Height Can be Selected Upon Installation, High Quality Factory Style Mounting Hardware assure trouble Free Performances on these Load Bearing Shock Assemblies, Monotube Construction Provides Maximum Performance and Ride Quality, Grade 8 Hardware for Reliability, Factory Style Rear Block and U-Bolt Assembly (No" stacking of blocks) Maintains Proper Rear Spring Operation, Custom Tuned Rear Bilstein Monotube Gas Pressure Shocks Provide Superior Damping Characteristics.

This kit is compatible with:

• 2004 - 2008 Ford F150 - 4WD

This kit includes:

• Front & rear crossmembers
• Driver side front spindle
• Compression struts
• Main kit
• Passenger side front spindle
• Bilstein 5100 Series Shock Absorbers

Wheel/Tire Specifications:

• Max Tire Size: 35" x 12.5" at 6" lift - minor trimming may be required.
• Max Backspace: 17" & larger x 8" - 4.625" backspacing.

Additional Information:

• Will NOT work with Air Ride or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Ford Dealer
• Rebalancing of factory front driveline is required
• System is “Front Ride Height Adjustable” of either 4” or 6” with multiple spring seat settings on the front coil-over shocks
• Vehicles operating in 4wd at higher speeds will require an aftermarket “Dual Cardan” type driveline
• Strut type coil spring compressor, along with factory front end disassembly tools are required for installation

2" Leveling Kit w/ Bilstein Shock Absorbers, 2005 - 2007 Ford F250(Non-Dually)/F350(NonDually)/Excursion 4WD

Part #: 10-42205

MSRP: $805.00 USD

RCD Suspension took a different approach than other manufactures in the leveling kit business, instead of spacers and brackets, RCD developed a "High Performance Leveling Kit" complete with replacement coil springs for a superior ride, replacement alignment cam eccentrics and custom tuned Bilstein Performance monotube shock absorbers which provide a smooth, precise and controlled ride.

2005-2014 2" Suspension System - Ford F250 / F350 8-Lug, 4WD features: Progressive rate coil springs are made from high quality U.S. spring steel providing long life and superior ride characteristics and Unique "Gator Black" polyurethane powder coat finish. Replacement Front Coil Springs -5160 alloy steel, hot wound, heat treated, shot penned, Bilstein 5100 Series Leveling Monotube Shock Absorbers with deflective disc valving(front & rear), Aftermarket Front Alignment Cams for Proper Adjustment, Increased Wheel Travel, Improved Handling and Suspension Performance, and traditional RCD Suspension fit and finish.

This kit is compatible with:

• 2005 - 2007 Ford F250 - 4WD (Non-Dually)
• 2005 - 2007 Ford F350 - 4WD (Non-Dually)
• 2005 - 2007 Ford Excursion - 4WD

This kit includes:

• Coil springs
• Bilstein 5100 Series Shock Absorbers

Wheel/Tire Specifications:

• Max Tire Size: 33" x 12.5" - Minor fender and/or bumper trimming may be required.
• Max Backspace: 16" & larger x 8"

Additional Information:

• Will NOT work with Air Ride or Electronic Suspension Systems
• Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Ford Dealer
• Stock drive shaft retained

Click Here to see this Kit with Fox Shock Absorbers