6" Lift Kit w/ Bilstein Shock Absorbers - Ford Expedition 4WD

10-42131
Suspension
$2,350.00
6" Suspension System w/ Bilstein Shock Absorbers, 1997 - 2002 Ford Expedition 4WD Part #: 10-42131 MSRP: $2,350.00 USD The 2WD & 4WD Ford F-150 & Expedition platforms have brought great popularity to the aftermarket enthusiast and RCD Suspension was the first in the industry to utilize this new platform...
Model :
Year :
Make :

6" Suspension System w/ Bilstein Shock Absorbers, 1997 - 2002 Ford Expedition 4WD

Part #: 10-42131

MSRP: $2,350.00 USD

The 2WD & 4WD Ford F-150 & Expedition platforms have brought great popularity to the aftermarket enthusiast and RCD Suspension was the first in the industry to utilize this new platform to develop sub-frame and spindle kits back in 1997. Developing these new kits for the U.S. Border Patrol gave RCD an upper hand in the design and development of this new technology with harsh proving grounds in the southwestern deserts of the United States. In 2004, Ford redesigned the F-150 platform to a "coil over strut" design and RCD Suspension stood up to the task. The new RCD 4wd F150 Suspension System was produced using a solid sub-frame spindle design with new Bilstein monotube front struts providing superior handling and performance. RCD Suspension continues to provide 2wd & 4wd systems for most 1997 through 2008 models.

The RCD 5" Suspension System for the 1997-2002 Ford Expedition w/Rear Coil Springs, 4WD includes: CNC machined replacement cast iron steering knuckles, Heavy duty one piece differential skid plate, Machined aluminum front driveline and axle hardware, Factory style rear block and U-bolt assembly (no "Stacking" of blocks), Custom tuned front ride height adjustable Bilstein monotube gas pressure shocks that feature: A 4.5" or 6" ride height can be selected upon installation; and high quality, factory style mounting hardware that ensures trouble free performance on these load bearing shock assemblies.

This kit is compatible with:

  • 1997-2002 Ford Expedition, 4WD

This kit includes:

  • Crossmembers
  • Front spindles
  • Main kit
  • Sway bar/Hardware
  • Bilstein 5100 Series Shock Absorbers

Wheel/Tire Specifications:

  • Max Tire Size: 35" x 12.5" - minor fender and/or bumper trimming may be required.
  • Max Backspace: 16" x 8" - 4.625" backspacing. 

Additional Information:

  • Will NOT work with Air Ride or Electronic Suspension Systems
  • Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Ford Dealer
  • Vehicles equipped with short style 4R70W transmission will need modification. Call or email for additional information.
  • Stock drive shaft retained
  • Full time 4WD models will require modification
You have successfully subscribed!
This email has been registered