4"-6" Lift Kit w/ Bilstein Shock Absorbers - 94-02 Dodge Ram 2500 4WD

10-46694
Suspension
$2,070.00
4.5" - 6" Suspension System w/ Bilstein 5100 Series Shocks - 1994 - 2002 Dodge Ram 2500, 4wd Part #: 10-46694 MSRP: $2,070.00 USD The late model Dodge 8 lug platform has become a mainstay with truck consumers, especially with the Cummins Diesel crowd. The ever popular solid axle front...
Year :
Make :
Model :

4.5" - 6" Suspension System w/ Bilstein 5100 Series Shocks - 1994 - 2002 Dodge Ram 2500, 4wd

Part #: 10-46694

MSRP: $2,070.00 USD


The late model Dodge 8 lug platform has become a mainstay with truck consumers, especially with the Cummins Diesel crowd. The ever popular solid axle front end continues to perform well and lends itself to be modified with a good deal of aftermarket products. RCD Suspension has utilized its high quality design and manufacturing capability to produce a system that both rides and performs whether on the street or in the dirt.

The RCD 6" Suspension System for the 1994 - 2002 Dodge Ram 2500 with Bilstein 5100 Series Shocks includes: Heavy Duty spring coils replace stock coils increasing ride height by 6"; 1 1/2" Add-a-leaf for the rear leaf pack and factory-style, rear block with U-bolt assembly (no stacking of blocks) to accomodate the 6" suspension system; RCD upper an lower control arms replace stock control arms along with heavy duty tubular track bar bracket and pitman arm.

This kit is compatible with:

  • 1994-2002 Dodge Ram 2500 - 4WD
(Manufacturing date must be on or after 2/9/1994)

This kit includes:
  • Main kit
  • Control arms
  • Coil springs
  • Add-a-leaf kit
  • Blocks
  • Bilstein 5100 Series Shock Absorbers

Wheel/Tire Specifications:
Max Tire Size: 33" x 12.5" w/ no modifications necessary. 35" w/ minor bumper and/or fender trimming.

Max Backspace: 16" x 8" -4.5" backspace. 16" & larger x 8" = 4.625" backspacing.

Additional Information:
  • Will NOT work with Air Ride or Electronic Suspension Systems
  • Recalibration of the speedometer, ABS and stability control systems (if applicable) will be required by an authorized Dodge Dealer
  • Actual lift height will vary based on engine and chassis combinations. Vehicle equipped with factory “Off Road” Package will achieve 1” less lift than standard equipped vehicles
  • Welding is required to install this kit. Welding should be completed by a certified welder
  • Drive shaft modification may be required
  • MUST SELECT APPROPRIATE PITMAN ARMS TO COMPLETE THE KIT INSTALLATION DEPENDING UPON YEAR OF VEHICLE

USE PITMAN ARM 10-20257 FOR 1994-1999 RAM 2500

USE PITMAN ARM 10-20270 FOR 2000-2002 RAM 2500

 

You have successfully subscribed!
This email has been registered